view description

RME AEB 4/O:4 analog outputs with 24 bit DA-converters.The AEB4-O adds four analog outputs in professional quality to all ADAT capable cards of the DIGI96 series. Level adjustment +4 dBu/-10 dBV, 106 dBA SNR and a servo balanced output stage deliver perfe	$199.00 Buy Now

Features: The AEB4-O is designed for maximum flexibility. Jumpers allow to route channels 1/2 3/4 or 5/6 7/8 to the four analog outputs. Installation is done in a convinient manner using the supplied bracket, or - as no contact to any slot on the motherboard is needed - at any place inside the computer. Nuts for all TRS jacks and a drilling template are included. The AEB8-O offers 8 outputs with 4 stereo TRS jacks. Usual insert cable can be used to split the connectors from stereo jack to mono jacks. It is also possible to drive up to 4 stereo headphones directly. Level adjustment +4 dBu/-10 dBV, 106 dBA SNR and highest suppression of PC-noise guarantee perfect sound quality. Operation Using the Analog Expansion Board is very simple. The AEB operates like any other DA-converter with ADAT input, except that it is connected internally. Therefore 'Force Adat' should be activated in the Settings dialog to guarantee an ADAT output signal. When the output of the DIGI is in ADAT mode the signals present at the optical output are also available as analog signals at the outputs of the AEB4-O. Two jumpers allow to choose, which of the 8 ADAT channels will be present at the 4 analog outputs. Cards of the DIGI96 series including an analog output allow to assign it freely. Therefore PST, PAD and PRO offer a total of 6 analog output signals with the AEB4-O. Technical Specifications and Features Output AEB4-O 4 x 1/4" TRS jack, servo balanced Output AEB8-O 4 x 1/4" TRS jack, unbalanced Dynamic ratio 103 dB (RMS unweighted), 106 dBA THD+N -95 dB (0.0017 %) Frequency response -0.1 dB: 10 Hz - 21 kHz Output level for 0 dBFS @ +4 dBu: +12 dBu Output level for 0 dBFS @ -10 dBV: +2 dBV Crosstalk > 110 dB Supported sample rates 32 kHz - 48 kHz Output impedance 75 Ohm Power supply uses 3.5" floppy connector, 12/5 V DC, 190 mA AEB needs no slot on the motherboard Standard bracket, board dimensions AEB4: 85 x 95 mm, AEB8: 120 x 95 mm 1 internal cable 2-pin, 1 power adapter cable 5 1/4" to 2 x 3.5" included Specs and Pictures